How To Install Window Blinds In Salt Lake City

Countless Salt Lake City residents turn to window blinds when they require more privacy and control over daylight in their properties. They’re a practical and budget-friendly window covering. They also take just a few steps to install for skilled do-it-yourselfers. But, nothing is more convenient than hiring an expert window treatment installer. Here are the fundamental steps of hanging window blinds and when you should call the pros to handle it for you.

Measure And Mark Everything Exactly

Prior to beginning, determine if you want outside-mount or inside-mount blinds. This crucial bit of info will let you know where to measure. Take measurements of the width, depth, and height on the inside of your window frame for inside-mount installations. When attaching outside-mount blinds, find the height and width of your window, counting the trim, and add three inches to your measurements to ensure good coverage. Measure precisely–don’t round up or down. Ill-fitting blinds will not function satisfactorily.

Order Your Blinds

When you have your dimensions, you are ready to shop for blinds. You may already know what style of blinds you wish to have. Buy blinds that are as close to your measurements as possible. Off-the-shelf blinds often won’t fit perfectly, either jutting out too far or not meeting the window edge entirely. Ensure you get hardware that let you hang the blinds at the appropriate depth, also. You should choose specially made blinds and parts for a superior fit.

Install Your Window Blinds

Your blinds may come with instructions. Follow them to affix your particular product. If you would like a sample of how hard it is to install window blinds in Salt Lake City, here are some basic steps to provide a better idea.

 

Inside Mount Blinds

 

1. Put a bracket on the top of the inside of the window approximately one inch from the outer edge. Ensure this placement won’t interfere with the blind’s function. Outline the bracket holes with a pencil.
2. Drill pilot holes on your marks.
3. Align the hardware where you drilled and fasten with screws.
4. Duplicate the opening three steps for the next bracket.
5. Place the end caps onto the top rail of your blinds. Position the headrail into the brackets.

Attach the tilt wand and check it. Also, test the pull cord.

Outside Mount Blinds

1. Figure out if you’re installing on the window trim or wall around the window. Hold up the headrail and make sure the blind reaches the bottom edge of the window.
2. Mark the outer edges of the headrail.
3. Measure four inches from each headrail mark and mark here for the screws.
4. Drill pilot holes as indicated.
5. Line up the bracket holes with the drilled holes and fasten with screws.
6. Position the top rail into the brackets.

Attach the tilt wand and test out everything to make sure it works.

Choose The Simplest Way To Install Blinds 

Of course, you don’t need to do blinds yourself. The simplest way to install window blinds in Salt Lake City is to seek out a professional window treatment installer. They will work with you at every step. They’ll help you select blinds that match your needs and preferences, make precise measurements for a custom product, and put them up for you. They support customers daily, so they’ll handle your job quickly and accurately. They’ll be able to diagnose any issues without spending hours searching for help on websites. A window treatment installer will also offer higher-quality blinds than online or box stores.

Avoid The Trouble And Have Sunburst Shutters Install Your Window Blinds In Salt Lake City

Installing window blinds in Salt Lake City couldn’t be more effortless when you work with Sunburst Shutters Salt Lake City. We’ll help you select made-to-order blinds that will match your windows perfectly, and our skilled installation crew will attach them for you. All you must do is dial 801-515-3598 or submit the form on this page to arrange a complimentary in-home consultation.